diff --git a/LAB3/cons/basys3_master.xdc b/LAB3/cons/basys3_master.xdc
deleted file mode 100644
index a0a16cb..0000000
--- a/LAB3/cons/basys3_master.xdc
+++ /dev/null
@@ -1,294 +0,0 @@
-## This file is a general .xdc for the Basys3 rev B board
-## To use it in a project:
-## - uncomment the lines corresponding to used pins
-## - rename the used ports (in each line, after get_ports) according to the top level signal names in the project
-
-## Clock signal
-#set_property PACKAGE_PIN W5 [get_ports clk]
-	#set_property IOSTANDARD LVCMOS33 [get_ports clk]
-	#create_clock -add -name sys_clk_pin -period 10.00 -waveform {0 5} [get_ports clk]
-
-## Switches
-#set_property PACKAGE_PIN V17 [get_ports {sw[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[0]}]
-#set_property PACKAGE_PIN V16 [get_ports {sw[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[1]}]
-#set_property PACKAGE_PIN W16 [get_ports {sw[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[2]}]
-#set_property PACKAGE_PIN W17 [get_ports {sw[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[3]}]
-#set_property PACKAGE_PIN W15 [get_ports {sw[4]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[4]}]
-#set_property PACKAGE_PIN V15 [get_ports {sw[5]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[5]}]
-#set_property PACKAGE_PIN W14 [get_ports {sw[6]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[6]}]
-#set_property PACKAGE_PIN W13 [get_ports {sw[7]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[7]}]
-#set_property PACKAGE_PIN V2 [get_ports {sw[8]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[8]}]
-#set_property PACKAGE_PIN T3 [get_ports {sw[9]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[9]}]
-#set_property PACKAGE_PIN T2 [get_ports {sw[10]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[10]}]
-#set_property PACKAGE_PIN R3 [get_ports {sw[11]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[11]}]
-#set_property PACKAGE_PIN W2 [get_ports {sw[12]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[12]}]
-#set_property PACKAGE_PIN U1 [get_ports {sw[13]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[13]}]
-#set_property PACKAGE_PIN T1 [get_ports {sw[14]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[14]}]
-#set_property PACKAGE_PIN R2 [get_ports {sw[15]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {sw[15]}]
-
-
-## LEDs
-#set_property PACKAGE_PIN U16 [get_ports {led[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[0]}]
-#set_property PACKAGE_PIN E19 [get_ports {led[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[1]}]
-#set_property PACKAGE_PIN U19 [get_ports {led[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[2]}]
-#set_property PACKAGE_PIN V19 [get_ports {led[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[3]}]
-#set_property PACKAGE_PIN W18 [get_ports {led[4]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[4]}]
-#set_property PACKAGE_PIN U15 [get_ports {led[5]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[5]}]
-#set_property PACKAGE_PIN U14 [get_ports {led[6]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[6]}]
-#set_property PACKAGE_PIN V14 [get_ports {led[7]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[7]}]
-#set_property PACKAGE_PIN V13 [get_ports {led[8]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[8]}]
-#set_property PACKAGE_PIN V3 [get_ports {led[9]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[9]}]
-#set_property PACKAGE_PIN W3 [get_ports {led[10]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[10]}]
-#set_property PACKAGE_PIN U3 [get_ports {led[11]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[11]}]
-#set_property PACKAGE_PIN P3 [get_ports {led[12]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[12]}]
-#set_property PACKAGE_PIN N3 [get_ports {led[13]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[13]}]
-#set_property PACKAGE_PIN P1 [get_ports {led[14]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[14]}]
-#set_property PACKAGE_PIN L1 [get_ports {led[15]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {led[15]}]
-
-
-##7 segment display
-#set_property PACKAGE_PIN W7 [get_ports {seg[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {seg[0]}]
-#set_property PACKAGE_PIN W6 [get_ports {seg[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {seg[1]}]
-#set_property PACKAGE_PIN U8 [get_ports {seg[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {seg[2]}]
-#set_property PACKAGE_PIN V8 [get_ports {seg[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {seg[3]}]
-#set_property PACKAGE_PIN U5 [get_ports {seg[4]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {seg[4]}]
-#set_property PACKAGE_PIN V5 [get_ports {seg[5]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {seg[5]}]
-#set_property PACKAGE_PIN U7 [get_ports {seg[6]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {seg[6]}]
-
-#set_property PACKAGE_PIN V7 [get_ports dp]
-	#set_property IOSTANDARD LVCMOS33 [get_ports dp]
-
-#set_property PACKAGE_PIN U2 [get_ports {an[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {an[0]}]
-#set_property PACKAGE_PIN U4 [get_ports {an[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {an[1]}]
-#set_property PACKAGE_PIN V4 [get_ports {an[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {an[2]}]
-#set_property PACKAGE_PIN W4 [get_ports {an[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {an[3]}]
-
-
-##Buttons
-#set_property PACKAGE_PIN U18 [get_ports btnC]
-	#set_property IOSTANDARD LVCMOS33 [get_ports btnC]
-#set_property PACKAGE_PIN T18 [get_ports btnU]
-	#set_property IOSTANDARD LVCMOS33 [get_ports btnU]
-#set_property PACKAGE_PIN W19 [get_ports btnL]
-	#set_property IOSTANDARD LVCMOS33 [get_ports btnL]
-#set_property PACKAGE_PIN T17 [get_ports btnR]
-	#set_property IOSTANDARD LVCMOS33 [get_ports btnR]
-#set_property PACKAGE_PIN U17 [get_ports btnD]
-	#set_property IOSTANDARD LVCMOS33 [get_ports btnD]
-
-
-
-##Pmod Header JA
-##Sch name = JA1
-#set_property PACKAGE_PIN J1 [get_ports {JA[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JA[0]}]
-##Sch name = JA2
-#set_property PACKAGE_PIN L2 [get_ports {JA[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JA[1]}]
-##Sch name = JA3
-#set_property PACKAGE_PIN J2 [get_ports {JA[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JA[2]}]
-##Sch name = JA4
-#set_property PACKAGE_PIN G2 [get_ports {JA[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JA[3]}]
-##Sch name = JA7
-#set_property PACKAGE_PIN H1 [get_ports {JA[4]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JA[4]}]
-##Sch name = JA8
-#set_property PACKAGE_PIN K2 [get_ports {JA[5]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JA[5]}]
-##Sch name = JA9
-#set_property PACKAGE_PIN H2 [get_ports {JA[6]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JA[6]}]
-##Sch name = JA10
-#set_property PACKAGE_PIN G3 [get_ports {JA[7]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JA[7]}]
-
-
-
-##Pmod Header JB
-##Sch name = JB1
-#set_property PACKAGE_PIN A14 [get_ports {JB[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JB[0]}]
-##Sch name = JB2
-#set_property PACKAGE_PIN A16 [get_ports {JB[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JB[1]}]
-##Sch name = JB3
-#set_property PACKAGE_PIN B15 [get_ports {JB[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JB[2]}]
-##Sch name = JB4
-#set_property PACKAGE_PIN B16 [get_ports {JB[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JB[3]}]
-##Sch name = JB7
-#set_property PACKAGE_PIN A15 [get_ports {JB[4]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JB[4]}]
-##Sch name = JB8
-#set_property PACKAGE_PIN A17 [get_ports {JB[5]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JB[5]}]
-##Sch name = JB9
-#set_property PACKAGE_PIN C15 [get_ports {JB[6]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JB[6]}]
-##Sch name = JB10
-#set_property PACKAGE_PIN C16 [get_ports {JB[7]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JB[7]}]
-
-
-
-##Pmod Header JC
-##Sch name = JC1
-#set_property PACKAGE_PIN K17 [get_ports {JC[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JC[0]}]
-##Sch name = JC2
-#set_property PACKAGE_PIN M18 [get_ports {JC[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JC[1]}]
-##Sch name = JC3
-#set_property PACKAGE_PIN N17 [get_ports {JC[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JC[2]}]
-##Sch name = JC4
-#set_property PACKAGE_PIN P18 [get_ports {JC[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JC[3]}]
-##Sch name = JC7
-#set_property PACKAGE_PIN L17 [get_ports {JC[4]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JC[4]}]
-##Sch name = JC8
-#set_property PACKAGE_PIN M19 [get_ports {JC[5]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JC[5]}]
-##Sch name = JC9
-#set_property PACKAGE_PIN P17 [get_ports {JC[6]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JC[6]}]
-##Sch name = JC10
-#set_property PACKAGE_PIN R18 [get_ports {JC[7]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JC[7]}]
-
-
-##Pmod Header JXADC
-##Sch name = XA1_P
-#set_property PACKAGE_PIN J3 [get_ports {JXADC[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JXADC[0]}]
-##Sch name = XA2_P
-#set_property PACKAGE_PIN L3 [get_ports {JXADC[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JXADC[1]}]
-##Sch name = XA3_P
-#set_property PACKAGE_PIN M2 [get_ports {JXADC[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JXADC[2]}]
-##Sch name = XA4_P
-#set_property PACKAGE_PIN N2 [get_ports {JXADC[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JXADC[3]}]
-##Sch name = XA1_N
-#set_property PACKAGE_PIN K3 [get_ports {JXADC[4]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JXADC[4]}]
-##Sch name = XA2_N
-#set_property PACKAGE_PIN M3 [get_ports {JXADC[5]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JXADC[5]}]
-##Sch name = XA3_N
-#set_property PACKAGE_PIN M1 [get_ports {JXADC[6]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JXADC[6]}]
-##Sch name = XA4_N
-#set_property PACKAGE_PIN N1 [get_ports {JXADC[7]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {JXADC[7]}]
-
-
-
-##VGA Connector
-#set_property PACKAGE_PIN G19 [get_ports {vgaRed[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaRed[0]}]
-#set_property PACKAGE_PIN H19 [get_ports {vgaRed[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaRed[1]}]
-#set_property PACKAGE_PIN J19 [get_ports {vgaRed[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaRed[2]}]
-#set_property PACKAGE_PIN N19 [get_ports {vgaRed[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaRed[3]}]
-#set_property PACKAGE_PIN N18 [get_ports {vgaBlue[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaBlue[0]}]
-#set_property PACKAGE_PIN L18 [get_ports {vgaBlue[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaBlue[1]}]
-#set_property PACKAGE_PIN K18 [get_ports {vgaBlue[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaBlue[2]}]
-#set_property PACKAGE_PIN J18 [get_ports {vgaBlue[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaBlue[3]}]
-#set_property PACKAGE_PIN J17 [get_ports {vgaGreen[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaGreen[0]}]
-#set_property PACKAGE_PIN H17 [get_ports {vgaGreen[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaGreen[1]}]
-#set_property PACKAGE_PIN G17 [get_ports {vgaGreen[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaGreen[2]}]
-#set_property PACKAGE_PIN D17 [get_ports {vgaGreen[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {vgaGreen[3]}]
-#set_property PACKAGE_PIN P19 [get_ports Hsync]
-	#set_property IOSTANDARD LVCMOS33 [get_ports Hsync]
-#set_property PACKAGE_PIN R19 [get_ports Vsync]
-	#set_property IOSTANDARD LVCMOS33 [get_ports Vsync]
-
-
-##USB-RS232 Interface
-#set_property PACKAGE_PIN B18 [get_ports RsRx]
-	#set_property IOSTANDARD LVCMOS33 [get_ports RsRx]
-#set_property PACKAGE_PIN A18 [get_ports RsTx]
-	#set_property IOSTANDARD LVCMOS33 [get_ports RsTx]
-
-
-##USB HID (PS/2)
-#set_property PACKAGE_PIN C17 [get_ports PS2Clk]
-	#set_property IOSTANDARD LVCMOS33 [get_ports PS2Clk]
-	#set_property PULLUP true [get_ports PS2Clk]
-#set_property PACKAGE_PIN B17 [get_ports PS2Data]
-	#set_property IOSTANDARD LVCMOS33 [get_ports PS2Data]
-	#set_property PULLUP true [get_ports PS2Data]
-
-
-##Quad SPI Flash
-##Note that CCLK_0 cannot be placed in 7 series devices. You can access it using the
-##STARTUPE2 primitive.
-#set_property PACKAGE_PIN D18 [get_ports {QspiDB[0]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {QspiDB[0]}]
-#set_property PACKAGE_PIN D19 [get_ports {QspiDB[1]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {QspiDB[1]}]
-#set_property PACKAGE_PIN G18 [get_ports {QspiDB[2]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {QspiDB[2]}]
-#set_property PACKAGE_PIN F18 [get_ports {QspiDB[3]}]
-	#set_property IOSTANDARD LVCMOS33 [get_ports {QspiDB[3]}]
-#set_property PACKAGE_PIN K19 [get_ports QspiCSn]
-	#set_property IOSTANDARD LVCMOS33 [get_ports QspiCSn]
diff --git a/LAB3/src/LFO.vhd b/LAB3/src/LFO.vhd
new file mode 100644
index 0000000..b596bb8
--- /dev/null
+++ b/LAB3/src/LFO.vhd
@@ -0,0 +1,40 @@
+    library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+-- Uncomment the following library declaration if using
+-- arithmetic functions with Signed or Unsigned values
+use IEEE.NUMERIC_STD.ALL;
+
+entity LFO is
+    generic(
+        CHANNEL_LENGHT  : integer := 24;
+        JOYSTICK_LENGHT  : integer := 10;
+        CLK_PERIOD_NS   : integer := 10;
+        TRIANGULAR_COUNTER_LENGHT    : integer := 10 -- Triangular wave period length
+    );
+    Port (
+        
+            aclk			: in std_logic;
+            aresetn			: in std_logic;
+            
+            lfo_period      : in std_logic_vector(JOYSTICK_LENGHT-1 downto 0);
+            
+            lfo_enable      : in std_logic;
+    
+            s_axis_tvalid	: in std_logic;
+            s_axis_tdata	: in std_logic_vector(CHANNEL_LENGHT-1 downto 0);
+            s_axis_tlast    : in std_logic;
+            s_axis_tready	: out std_logic;
+    
+            m_axis_tvalid	: out std_logic;
+            m_axis_tdata	: out std_logic_vector(CHANNEL_LENGHT-1 downto 0);
+            m_axis_tlast	: out std_logic;
+            m_axis_tready	: in std_logic
+        );
+end entity LFO;
+
+architecture Behavioral of LFO is
+
+begin  
+
+end architecture;
\ No newline at end of file
diff --git a/LAB3/src/all_pass_filter.vhd b/LAB3/src/all_pass_filter.vhd
new file mode 100644
index 0000000..6d9de3b
--- /dev/null
+++ b/LAB3/src/all_pass_filter.vhd
@@ -0,0 +1,29 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use ieee.numeric_std.all;
+
+entity all_pass_filter is
+	generic (
+		TDATA_WIDTH		: positive := 24
+	);
+	Port (
+		aclk			: in std_logic;
+		aresetn			: in std_logic;
+
+		s_axis_tvalid	: in std_logic;
+		s_axis_tdata	: in std_logic_vector(TDATA_WIDTH-1 downto 0);
+		s_axis_tlast	: in std_logic;
+		s_axis_tready	: out std_logic;
+
+		m_axis_tvalid	: out std_logic;
+		m_axis_tdata	: out std_logic_vector(TDATA_WIDTH-1 downto 0);
+		m_axis_tlast	: out std_logic;
+		m_axis_tready	: in std_logic
+	);
+end all_pass_filter;
+
+architecture Behavioral of all_pass_filter is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/balance_controller.vhd b/LAB3/src/balance_controller.vhd
new file mode 100644
index 0000000..1d5f90c
--- /dev/null
+++ b/LAB3/src/balance_controller.vhd
@@ -0,0 +1,33 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use ieee.numeric_std.all;
+
+entity balance_controller is
+	generic (
+		TDATA_WIDTH		: positive := 24;
+		BALANCE_WIDTH	: positive := 10;
+		BALANCE_STEP_2	: positive := 6		-- i.e., balance_values_per_step = 2**VOLUME_STEP_2
+	);
+	Port (
+		aclk			: in std_logic;
+		aresetn			: in std_logic;
+
+		s_axis_tvalid	: in std_logic;
+		s_axis_tdata	: in std_logic_vector(TDATA_WIDTH-1 downto 0);
+		s_axis_tready	: out std_logic;
+		s_axis_tlast	: in std_logic;
+
+		m_axis_tvalid	: out std_logic;
+		m_axis_tdata	: out std_logic_vector(TDATA_WIDTH-1 downto 0);
+		m_axis_tready	: in std_logic;
+		m_axis_tlast	: out std_logic;
+
+		balance			: in std_logic_vector(BALANCE_WIDTH-1 downto 0)
+	);
+end balance_controller;
+
+architecture Behavioral of balance_controller is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/debouncer.vhd b/LAB3/src/debouncer.vhd
new file mode 100644
index 0000000..987dbdc
--- /dev/null
+++ b/LAB3/src/debouncer.vhd
@@ -0,0 +1,66 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use IEEE.NUMERIC_STD.ALL;
+
+-- This module can be used to remove the "bouncing" of a signal, so that the
+-- output changes no more than once every DEBOUNCE_MS milliseconds
+entity debouncer is
+	generic (
+		DEBOUNCE_MS		: positive := 10;
+		CLOCK_FREQ		: positive := 100_000_000
+	);
+	Port (
+		-- Clock and reset
+		clk				: in std_logic;
+		reset			: in std_logic;
+
+		-- I/Os
+		input_signal	: in std_logic;
+		debounced		: out std_logic
+	);
+end debouncer;
+
+architecture Behavioral of debouncer is
+
+	constant COUNTER_HIGH	: integer := CLOCK_FREQ / 1000 * DEBOUNCE_MS - 1;
+
+	signal debounced_int	: std_logic;
+	signal counter			: integer range 0 to COUNTER_HIGH;
+
+begin
+
+	-- To be able to read the value of input_debounced (which is an "out" port)
+	-- we have to declare a signal and assign that to the external port.
+	debounced	<= debounced_int;
+
+	process(clk, reset)
+	begin
+		if reset = '1' then
+
+			debounced_int	<= input_signal;
+			counter			<= 0;
+
+		elsif rising_edge(clk) then
+
+			if counter = 0 then
+
+				-- Keep sampling input_signal.
+				debounced_int	<= input_signal;
+
+				-- If input_signal has changed from the last sample, start
+				-- the timer.
+				if debounced_int /= input_signal then
+					counter		<= COUNTER_HIGH;
+				end if;
+
+			else
+				-- When the timer is running, no change is recorded, so the
+				-- output stays constant.
+				counter	 <= counter - 1;
+			end if;
+
+		end if;
+	end process;
+
+
+end Behavioral;
diff --git a/LAB3/src/digilent_jstk2.vhd b/LAB3/src/digilent_jstk2.vhd
new file mode 100644
index 0000000..9194ef3
--- /dev/null
+++ b/LAB3/src/digilent_jstk2.vhd
@@ -0,0 +1,49 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity digilent_jstk2 is
+	generic (
+		DELAY_US		: integer := 25;    -- Delay (in us) between two packets
+		CLKFREQ		 	: integer := 100_000_000;  -- Frequency of the aclk signal (in Hz)
+		SPI_SCLKFREQ 	: integer := 66_666 -- Frequency of the SPI SCLK clock signal (in Hz)
+	);
+	Port ( 
+		aclk 			: in  STD_LOGIC;
+		aresetn			: in  STD_LOGIC;
+
+		-- Data going TO the SPI IP-Core (and so, to the JSTK2 module)
+		m_axis_tvalid	: out STD_LOGIC;
+		m_axis_tdata	: out STD_LOGIC_VECTOR(7 downto 0);
+		m_axis_tready	: in STD_LOGIC;
+
+		-- Data coming FROM the SPI IP-Core (and so, from the JSTK2 module)
+		-- There is no tready signal, so you must be always ready to accept and use the incoming data, or it will be lost!
+		s_axis_tvalid	: in STD_LOGIC;
+		s_axis_tdata	: in STD_LOGIC_VECTOR(7 downto 0);
+
+		-- Joystick and button values read from the module
+		jstk_x			: out std_logic_vector(9 downto 0);
+		jstk_y			: out std_logic_vector(9 downto 0);
+		btn_jstk		: out std_logic;
+		btn_trigger		: out std_logic;
+
+		-- LED color to send to the module
+		led_r			: in std_logic_vector(7 downto 0);
+		led_g			: in std_logic_vector(7 downto 0);
+		led_b			: in std_logic_vector(7 downto 0)
+	);
+end digilent_jstk2;
+
+architecture Behavioral of digilent_jstk2 is
+
+	-- Code for the SetLEDRGB command, see the JSTK2 datasheet.
+	constant CMDSETLEDRGB		: std_logic_vector(7 downto 0) := x"84";
+
+	-- Do not forget that you MUST wait a bit between two packets. See the JSTK2 datasheet (and the SPI IP-Core README).
+	------------------------------------------------------------
+
+begin
+
+	-- ...
+
+end architecture;
diff --git a/LAB3/src/edge_detector_toggle.vhd b/LAB3/src/edge_detector_toggle.vhd
new file mode 100644
index 0000000..061c3fa
--- /dev/null
+++ b/LAB3/src/edge_detector_toggle.vhd
@@ -0,0 +1,20 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity edge_detector_toggle is
+	generic (
+		EDGE_RISING		: boolean := true
+	);
+	port (
+		input_signal	: in std_logic;
+		clk				: in std_logic;
+		reset			: in std_logic;
+		output_signal	: out std_logic
+	);
+end edge_detector_toggle;
+
+architecture Behavioral of edge_detector_toggle is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/effect_selector.vhd b/LAB3/src/effect_selector.vhd
new file mode 100644
index 0000000..f8b1184
--- /dev/null
+++ b/LAB3/src/effect_selector.vhd
@@ -0,0 +1,54 @@
+----------------------------------------------------------------------------------
+-- Company: 
+-- Engineer: 
+-- 
+-- Create Date: 04/29/2024 10:12:03 AM
+-- Design Name: 
+-- Module Name: effect_selector - Behavioral
+-- Project Name: 
+-- Target Devices: 
+-- Tool Versions: 
+-- Description: 
+-- 
+-- Dependencies: 
+-- 
+-- Revision:
+-- Revision 0.01 - File Created
+-- Additional Comments:
+-- 
+----------------------------------------------------------------------------------
+
+
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+-- Uncomment the following library declaration if using
+-- arithmetic functions with Signed or Unsigned values
+--use IEEE.NUMERIC_STD.ALL;
+
+-- Uncomment the following library declaration if instantiating
+-- any Xilinx leaf cells in this code.
+--library UNISIM;
+--use UNISIM.VComponents.all;
+
+entity effect_selector is
+    generic(
+        JOYSTICK_LENGHT  : integer := 10
+    );
+    Port (
+        aclk : in STD_LOGIC;
+        aresetn : in STD_LOGIC;
+        effect : in STD_LOGIC;
+        jstck_x : in STD_LOGIC_VECTOR(JOYSTICK_LENGHT-1 downto 0);
+        jstck_y : in STD_LOGIC_VECTOR(JOYSTICK_LENGHT-1 downto 0);
+        volume : out STD_LOGIC_VECTOR(JOYSTICK_LENGHT-1 downto 0);
+        balance : out STD_LOGIC_VECTOR(JOYSTICK_LENGHT-1 downto 0);
+        lfo_period : out STD_LOGIC_VECTOR(JOYSTICK_LENGHT-1 downto 0)
+    );
+end effect_selector;
+
+architecture Behavioral of effect_selector is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/jstk_uart_bridge.vhd b/LAB3/src/jstk_uart_bridge.vhd
new file mode 100644
index 0000000..2d9ec60
--- /dev/null
+++ b/LAB3/src/jstk_uart_bridge.vhd
@@ -0,0 +1,174 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity jstk_uart_bridge is
+	generic (
+		HEADER_CODE		: std_logic_vector(7 downto 0) := x"c0";
+		TX_DELAY		: positive := 1_000_000;
+		JSTK_BITS		: integer range 1 to 7 := 7
+	);
+	Port ( 
+		aclk 			: in  STD_LOGIC;
+		aresetn			: in  STD_LOGIC;
+
+		m_axis_tvalid	: out STD_LOGIC;
+		m_axis_tdata	: out STD_LOGIC_VECTOR(7 downto 0);
+		m_axis_tready	: in STD_LOGIC;
+
+		s_axis_tvalid	: in STD_LOGIC;
+		s_axis_tdata	: in STD_LOGIC_VECTOR(7 downto 0);
+		s_axis_tready	: out STD_LOGIC;
+
+		jstk_x			: in std_logic_vector(9 downto 0);
+		jstk_y			: in std_logic_vector(9 downto 0);
+		btn_jstk		: in std_logic;
+		btn_trigger		: in std_logic;
+
+		led_r			: out std_logic_vector(7 downto 0);
+		led_g			: out std_logic_vector(7 downto 0);
+		led_b			: out std_logic_vector(7 downto 0)
+	);
+end jstk_uart_bridge;
+
+architecture Behavioral of jstk_uart_bridge is
+
+	type tx_state_type is (DELAY, SEND_HEADER, SEND_JSTK_X, SEND_JSTK_Y, SEND_BUTTONS);
+	signal tx_state			: tx_state_type;
+
+	signal tx_delay_counter	: integer range 0 to TX_DELAY-1;
+	signal jstk_x_msb		: std_logic_vector(m_axis_tdata'range);
+	signal jstk_y_msb		: std_logic_vector(m_axis_tdata'range);
+	signal buttons			: std_logic_vector(m_axis_tdata'range);
+
+	--------------------------------------------
+
+	type rx_state_type is (IDLE, GET_HEADER, GET_LED_R, GET_LED_G, GET_LED_B);
+	signal rx_state			: rx_state_type;
+
+	signal led_r_temp		: std_logic_vector(led_r'range);
+	signal led_g_temp		: std_logic_vector(led_r'range);
+
+begin
+
+	-- JSTK -> UART: Joystick position and buttons
+
+	with tx_state select m_axis_tvalid <=
+		'0'	when DELAY,
+		'1'	when SEND_HEADER,
+		'1'	when SEND_JSTK_X,
+		'1'	when SEND_JSTK_Y,
+		'1'	when SEND_BUTTONS;
+
+	with tx_state select m_axis_tdata <=
+		(others => '-')	when DELAY,
+		HEADER_CODE		when SEND_HEADER,
+		jstk_x_msb		when SEND_JSTK_X,
+		jstk_y_msb		when SEND_JSTK_Y,
+		buttons			when SEND_BUTTONS;
+
+	jstk_x_msb	<= (jstk_x_msb'high downto JSTK_BITS => '0') & jstk_x(jstk_x'high downto jstk_x'high-JSTK_BITS+1);
+	jstk_y_msb	<= (jstk_y_msb'high downto JSTK_BITS => '0') & jstk_y(jstk_y'high downto jstk_y'high-JSTK_BITS+1);
+	buttons		<= (buttons'high downto 2 => '0') & btn_trigger & btn_jstk;
+
+	process (aclk)
+	begin
+		if rising_edge(aclk) then
+			if aresetn = '0' then
+				
+				tx_state			<= DELAY;
+				tx_delay_counter	<= 0;
+
+			else
+				
+				case tx_state is
+					when DELAY =>
+						if tx_delay_counter = TX_DELAY-1 then
+							tx_delay_counter	<= 0;
+							tx_state			<= SEND_HEADER;
+						else
+							tx_delay_counter	<= tx_delay_counter + 1;
+						end if;
+					
+					when SEND_HEADER =>
+						if m_axis_tready = '1' then
+							tx_state	<= SEND_JSTK_X;
+						end if;
+
+					when SEND_JSTK_X =>
+						if m_axis_tready = '1' then
+							tx_state	<= SEND_JSTK_Y;
+						end if;
+
+					when SEND_JSTK_Y =>
+						if m_axis_tready = '1' then
+							tx_state	<= SEND_BUTTONS;
+						end if;
+
+					when SEND_BUTTONS =>
+						if m_axis_tready = '1' then
+							tx_state	<= DELAY;
+						end if;
+
+					end case;
+			end if;
+		end if;
+	end process;
+
+	-----------------------------------------------------------------------
+
+
+	-- UART -> JSTK: LEDs color
+
+	with rx_state select s_axis_tready <=
+		'0'	when IDLE,
+		'1'	when GET_HEADER,
+		'1'	when GET_LED_R,
+		'1'	when GET_LED_G,
+		'1'	when GET_LED_B;
+
+	process (aclk)
+	begin
+		if rising_edge(aclk) then
+			if aresetn = '0' then
+				
+				rx_state			<= IDLE;
+
+			else
+				
+				case rx_state is
+					when IDLE =>
+						rx_state		<= GET_HEADER;
+					
+					when GET_HEADER =>
+						if s_axis_tvalid = '1' and s_axis_tdata = HEADER_CODE then
+							rx_state	<= GET_LED_R;
+						else
+							-- Was expecting header, got something else: drop the value and stay in this state
+						end if;
+
+					when GET_LED_R =>
+						if s_axis_tvalid = '1' then
+							led_r_temp	<= s_axis_tdata;
+							rx_state	<= GET_LED_G;
+						end if;
+
+					when GET_LED_G =>
+						if s_axis_tvalid = '1' then
+							led_g_temp	<= s_axis_tdata;
+							rx_state	<= GET_LED_B;
+						end if;
+
+					when GET_LED_B =>
+						if s_axis_tvalid = '1' then
+							led_r		<= led_r_temp;
+							led_g		<= led_g_temp;
+							led_b		<= s_axis_tdata;
+							rx_state	<= GET_HEADER;
+						end if;
+
+					end case;
+			end if;
+		end if;
+	end process;
+
+end Behavioral;
diff --git a/LAB3/src/led_controller.vhd b/LAB3/src/led_controller.vhd
new file mode 100644
index 0000000..023a503
--- /dev/null
+++ b/LAB3/src/led_controller.vhd
@@ -0,0 +1,22 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+entity led_controller is
+	Generic (
+		LED_WIDTH		: positive := 8
+	);
+	Port (
+		mute_enable		: in std_logic;
+		filter_enable	: in std_logic;
+
+		led_r			: out std_logic_vector(LED_WIDTH-1 downto 0);
+		led_g			: out std_logic_vector(LED_WIDTH-1 downto 0);
+		led_b			: out std_logic_vector(LED_WIDTH-1 downto 0)
+	);
+end led_controller;
+
+architecture Behavioral of led_controller is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/led_level_controller.vhd b/LAB3/src/led_level_controller.vhd
new file mode 100644
index 0000000..01f2cf0
--- /dev/null
+++ b/LAB3/src/led_level_controller.vhd
@@ -0,0 +1,60 @@
+----------------------------------------------------------------------------------
+-- Company: 
+-- Engineer: 
+-- 
+-- Create Date: 22.05.2021 15:42:35
+-- Design Name: 
+-- Module Name: led_level_controller - Behavioral
+-- Project Name: 
+-- Target Devices: 
+-- Tool Versions: 
+-- Description: 
+-- 
+-- Dependencies: 
+-- 
+-- Revision:
+-- Revision 0.01 - File Created
+-- Additional Comments:
+-- 
+----------------------------------------------------------------------------------
+
+
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+-- Uncomment the following library declaration if using
+-- arithmetic functions with Signed or Unsigned values
+use IEEE.NUMERIC_STD.ALL;
+
+-- Uncomment the following library declaration if instantiating
+-- any Xilinx leaf cells in this code.
+--library UNISIM;
+--use UNISIM.VComponents.all;
+
+entity led_level_controller is
+    generic(
+        NUM_LEDS : positive := 16;
+        CHANNEL_LENGHT  : positive := 24;
+        refresh_time_ms: positive :=1;
+        clock_period_ns: positive :=10
+    );
+    Port (
+        
+        aclk			: in std_logic;
+        aresetn			: in std_logic;
+        
+        led    : out std_logic_vector(NUM_LEDS-1 downto 0);
+
+        s_axis_tvalid	: in std_logic;
+        s_axis_tdata	: in std_logic_vector(CHANNEL_LENGHT-1 downto 0);
+        s_axis_tlast    : in std_logic;
+        s_axis_tready	: out std_logic
+
+    );
+end led_level_controller;
+
+architecture Behavioral of led_level_controller is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/moving_average_filter.vhd b/LAB3/src/moving_average_filter.vhd
new file mode 100644
index 0000000..73dd17b
--- /dev/null
+++ b/LAB3/src/moving_average_filter.vhd
@@ -0,0 +1,32 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use ieee.numeric_std.all;
+
+entity moving_average_filter is
+	generic (
+		-- Filter order expressed as 2^(FILTER_ORDER_POWER)
+		FILTER_ORDER_POWER	: integer := 5;
+
+		TDATA_WIDTH			: positive := 24
+	);
+	Port (
+		aclk			: in std_logic;
+		aresetn			: in std_logic;
+
+		s_axis_tvalid	: in std_logic;
+		s_axis_tdata	: in std_logic_vector(TDATA_WIDTH-1 downto 0);
+		s_axis_tlast	: in std_logic;
+		s_axis_tready	: out std_logic;
+
+		m_axis_tvalid	: out std_logic;
+		m_axis_tdata	: out std_logic_vector(TDATA_WIDTH-1 downto 0);
+		m_axis_tlast	: out std_logic;
+		m_axis_tready	: in std_logic
+	);
+end moving_average_filter;
+
+architecture Behavioral of moving_average_filter is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/moving_average_filter_en.vhd b/LAB3/src/moving_average_filter_en.vhd
new file mode 100644
index 0000000..70c0d4c
--- /dev/null
+++ b/LAB3/src/moving_average_filter_en.vhd
@@ -0,0 +1,34 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use ieee.numeric_std.all;
+
+entity moving_average_filter_en is
+	generic (
+		-- Filter order expressed as 2^(FILTER_ORDER_POWER)
+		FILTER_ORDER_POWER	: integer := 5;
+
+		TDATA_WIDTH		: positive := 24
+	);
+	Port (
+		aclk			: in std_logic;
+		aresetn			: in std_logic;
+
+		s_axis_tvalid	: in std_logic;
+		s_axis_tdata	: in std_logic_vector(TDATA_WIDTH-1 downto 0);
+		s_axis_tlast	: in std_logic;
+		s_axis_tready	: out std_logic;
+
+		m_axis_tvalid	: out std_logic;
+		m_axis_tdata	: out std_logic_vector(TDATA_WIDTH-1 downto 0);
+		m_axis_tlast	: out std_logic;
+		m_axis_tready	: in std_logic;
+
+		enable_filter	: in std_logic
+	);
+end moving_average_filter_en;
+
+architecture Behavioral of moving_average_filter_en is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/mute_controller.vhd b/LAB3/src/mute_controller.vhd
new file mode 100644
index 0000000..2afdbf0
--- /dev/null
+++ b/LAB3/src/mute_controller.vhd
@@ -0,0 +1,31 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use IEEE.NUMERIC_STD.ALL;
+
+entity mute_controller is
+	Generic (
+		TDATA_WIDTH		: positive := 24
+	);
+	Port (
+		aclk			: in std_logic;
+		aresetn			: in std_logic;
+
+		s_axis_tvalid	: in std_logic;
+		s_axis_tdata	: in std_logic_vector(TDATA_WIDTH-1 downto 0);
+		s_axis_tlast	: in std_logic;
+		s_axis_tready	: out std_logic;
+
+		m_axis_tvalid	: out std_logic;
+		m_axis_tdata	: out std_logic_vector(TDATA_WIDTH-1 downto 0);
+		m_axis_tlast	: out std_logic;
+		m_axis_tready	: in std_logic;
+
+		mute			: in std_logic
+	);
+end mute_controller;
+
+architecture Behavioral of mute_controller is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/volume_controller.vhd b/LAB3/src/volume_controller.vhd
new file mode 100644
index 0000000..f47429f
--- /dev/null
+++ b/LAB3/src/volume_controller.vhd
@@ -0,0 +1,35 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use IEEE.NUMERIC_STD.ALL;
+
+entity volume_controller is
+	Generic (
+		TDATA_WIDTH		: positive := 24;
+		VOLUME_WIDTH	: positive := 10;
+		VOLUME_STEP_2	: positive := 6;		-- i.e., volume_values_per_step = 2**VOLUME_STEP_2
+		HIGHER_BOUND	: integer := 2**23-1;	-- Inclusive
+		LOWER_BOUND		: integer := -2**23		-- Inclusive
+	);
+	Port (
+		aclk			: in std_logic;
+		aresetn			: in std_logic;
+
+		s_axis_tvalid	: in std_logic;
+		s_axis_tdata	: in std_logic_vector(TDATA_WIDTH-1 downto 0);
+		s_axis_tlast	: in std_logic;
+		s_axis_tready	: out std_logic;
+
+		m_axis_tvalid	: out std_logic;
+		m_axis_tdata	: out std_logic_vector(TDATA_WIDTH-1 downto 0);
+		m_axis_tlast	: out std_logic;
+		m_axis_tready	: in std_logic;
+
+		volume			: in std_logic_vector(VOLUME_WIDTH-1 downto 0)
+	);
+end volume_controller;
+
+architecture Behavioral of volume_controller is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/volume_multiplier.vhd b/LAB3/src/volume_multiplier.vhd
new file mode 100644
index 0000000..34641e2
--- /dev/null
+++ b/LAB3/src/volume_multiplier.vhd
@@ -0,0 +1,33 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use IEEE.NUMERIC_STD.ALL;
+
+entity volume_multiplier is
+	Generic (
+		TDATA_WIDTH		: positive := 24;
+		VOLUME_WIDTH	: positive := 10;
+		VOLUME_STEP_2	: positive := 6		-- i.e., volume_values_per_step = 2**VOLUME_STEP_2
+	);
+	Port (
+		aclk			: in std_logic;
+		aresetn			: in std_logic;
+
+		s_axis_tvalid	: in std_logic;
+		s_axis_tdata	: in std_logic_vector(TDATA_WIDTH-1 downto 0);
+		s_axis_tlast	: in std_logic;
+		s_axis_tready	: out std_logic;
+
+		m_axis_tvalid	: out std_logic;
+		m_axis_tdata	: out std_logic_vector(TDATA_WIDTH-1 + 2**(VOLUME_WIDTH-VOLUME_STEP_2-1) downto 0);
+		m_axis_tlast	: out std_logic;
+		m_axis_tready	: in std_logic;
+
+		volume			: in std_logic_vector(VOLUME_WIDTH-1 downto 0)
+	);
+end volume_multiplier;
+
+architecture Behavioral of volume_multiplier is
+
+begin
+
+end Behavioral;
diff --git a/LAB3/src/volume_saturator.vhd b/LAB3/src/volume_saturator.vhd
new file mode 100644
index 0000000..ae69f9f
--- /dev/null
+++ b/LAB3/src/volume_saturator.vhd
@@ -0,0 +1,33 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use IEEE.NUMERIC_STD.ALL;
+
+entity volume_saturator is
+	Generic (
+		TDATA_WIDTH		: positive := 24;
+		VOLUME_WIDTH	: positive := 10;
+		VOLUME_STEP_2	: positive := 6;		-- i.e., number_of_steps = 2**(VOLUME_STEP_2)
+		HIGHER_BOUND	: integer := 2**15-1;	-- Inclusive
+		LOWER_BOUND		: integer := -2**15		-- Inclusive
+	);
+	Port (
+		aclk			: in std_logic;
+		aresetn			: in std_logic;
+
+		s_axis_tvalid	: in std_logic;
+		s_axis_tdata	: in std_logic_vector(TDATA_WIDTH-1 + 2**(VOLUME_WIDTH-VOLUME_STEP_2-1) downto 0);
+		s_axis_tlast	: in std_logic;
+		s_axis_tready	: out std_logic;
+
+		m_axis_tvalid	: out std_logic;
+		m_axis_tdata	: out std_logic_vector(TDATA_WIDTH-1 downto 0);
+		m_axis_tlast	: out std_logic;
+		m_axis_tready	: in std_logic
+	);
+end volume_saturator;
+
+architecture Behavioral of volume_saturator is
+
+begin
+
+end Behavioral;